Chassis Limitations: The Final Hurdle Preventing Chinese Automakers from Achieving Global Dominance

0
62

Key Takeaways

  • Li Xiang (Li Auto founder) warned that chassis technology may be the last obstacle preventing Chinese automakers from achieving global dominance.
  • Chinese EVs lead in smart cabins, driver‑assist systems, and power‑trains, but still trail premium brands like Porsche and Ferrari in chassis engineering.
  • The domestic market is dominated by semi‑active suspensions (air springs, CDC dampers); fully active systems remain low‑volume but are projected to grow sharply by 2030.
  • Steer‑by‑wire and brake‑by‑wire technologies are emerging, supported by new national standards (GB 21670‑2025, GB 17675‑2025), yet full electromechanical solutions need further maturation.
  • Software‑defined chassis platforms (e.g., Huawei’s Tuling Longxing, BYD’s DiSus‑Z) are delivering sub‑millisecond decision latency and integrated perception‑to‑execution loops.
  • China’s supply chain has rapidly localized: domestic firms now hold >92 % of the air‑suspension market, a stark reversal from foreign‑dominance a few years ago.
  • OEMs are pushing innovation—BYD’s Yangwang U7, Denza concept, Huawei‑powered Zunjie S800, and Li Auto L9 Livis showcase fully active suspensions, steer‑by‑wire, electro‑mechanical braking, and rear‑wheel steering with OTA upgradability.
  • While a performance gap persists, the pace of catch‑up, investment, and system‑level integration indicates China is moving from dependency to independent control of chassis technology.
  • The ultimate test for Chinese automakers will be building a chassis technology ecosystem that spans the entire industrial chain and can evolve sustainably, not just producing a single high‑end model.

Gap Identification
Li Xiang’s public remark that chassis technology could be “the final shortcoming holding back Chinese automakers from global dominance” resonated widely across the industry. Analysts agree that while Chinese new‑energy vehicles (NEVs) have surged ahead in intelligent cockpits, advanced driver‑assistance systems (ADAS), and electric powertrains, they still lag behind the chassis expertise of legacy luxury marques such as Porsche and Ferrari. This disparity is not merely perceptual; it reflects concrete differences in suspension architecture, steering and braking actuation, and the ability to tune vehicle dynamics for high‑performance scenarios. Recognizing this gap is the first step toward directing R&D resources and policy support where they are most needed.

Suspension Technology Landscape
Current Chinese passenger‑car suspensions are largely semi‑active, relying on air springs and continuously variable dampers (CDC). In 2025, air‑suspension installations reached roughly 1.272 million units, a penetration rate of 5.4 %, concentrated in the 200,000–300,000 CNY price segment. Fully active suspensions, which offer real‑time, independent control of each wheel, remain nascent: an estimated 130,000 units are forecast for 2026, rising to 590,000 by 2030. The slow adoption stems from higher cost, complexity, and limited domestic supply‑chain maturity for components such as high‑speed valves and precision actuators. Nevertheless, the trajectory indicates a clear upward trend as OEMs seek to bridge the dynamic performance gap with global rivals.

Steer‑by‑Wire and Brake‑by‑Wire Progress
Steer‑by‑wire (SbW) replaces mechanical linkages with electronic signals, serving as a critical enabler for Level 3+ autonomous driving. Similarly, brake‑by‑wire (BbW) aims to move from electro‑hydraulic braking (EHB) toward fully electromechanical braking (EMB). The implementation of two national standards in 2026—GB 21670‑2025 for braking and GB 17675‑2025 for steering—cleared regulatory hurdles for mass production of these systems. While SbW has appeared on flagship models from several EV makers, safety redundancy designs and mass‑production consistency are still under validation. EMB adoption is slower, as EHB solutions remain dominant; a full transition will require further validation of reliability, fault tolerance, and cost‑effective manufacturing.

Software‑Defined Chassis Innovations
Beyond hardware, Chinese firms are leveraging software to create “software‑defined” chassis. Huawei’s Tuling Longxing platform exemplifies this approach, employing a full‑domain fusion architecture that merges active perception, central control, intelligent inference, and self‑learning. The system achieves decision latencies under 1 millisecond, shifting chassis control from reactive to proactive. BYD’s Yangwang U7 integrates its DiSus‑Z fully active suspension with the e4 four‑motor drive, completing the perception‑to‑execution loop in just 5 milliseconds and enabling six‑degree‑of‑freedom body posture control. These breakthroughs demonstrate that Chinese automakers are rapidly narrowing the intelligence gap in chassis systems, even as hardware maturation continues.

Supply Chain Localization
A pivotal enabler of progress has been the localization of upstream components. In the first two months of 2026, domestic passenger‑car air‑suspension installations totaled 221,000 units, with Tuopu Group, Konghui Technology, and Baolong Technology capturing over 92 % of the market. This marks a dramatic shift from five years ago, when foreign suppliers such as Vibracoustic and Continental dominated. The rise of homegrown suppliers reduces reliance on imports, shortens lead times, and fosters iterative improvements through close collaboration with OEMs. Similar trends are emerging in SbW actuators, EMB modules, and high‑performance dampers, signaling a broader maturation of the chassis supply chain.

OEM‑Level Innovation
At the vehicle‑level, Chinese OEMs are unveiling architectures that integrate chassis subsystems into cohesive systems. BYD continues to expand its DiSus product family: the Yangwang U7 features the DiSus‑Z fully active suspension, while the Denza concept sports car debuts China’s first fully self‑developed steer‑by‑wire system paired with DiSus‑M. Huawei’s digital chassis ecosystem is gaining traction; the Zunjie S800 ships with the industry’s first proprietary intelligent digital chassis platform (Tuling Longxing), dual‑chamber air suspension, continuously variable dampers, and multi‑wheel steering control. The Xiangjie S9T, powered by the Tuling 3.0 platform, achieved a moose‑test speed of 83.3 km/h. Li Auto’s L9 Livis combines steer‑by‑wire, electro‑mechanical braking, and rear‑wheel steering, all upgradable via OTA, illustrating a holistic approach to chassis evolution.

Conclusion: Toward an Independent Chassis Ecosystem
The evidence shows that China’s chassis technology ecosystem is transitioning from foreign dependence to independent control. Market share, technical reserves, and supply‑chain clout are all improving rapidly. Nonetheless, chassis engineering remains a “final technical hurdle” for the global ambitions of Chinese automakers; achieving parity with the world’s best will require continued refinement of fully active suspensions, robust SbW/E MB systems, and validated software‑defined control loops. The true challenge lies not in producing a single benchmark model but in establishing a chassis technology system that spans the entire industrial chain—encompassing component suppliers, OEM integration, software platforms, and sustainable iteration capabilities. If China can build such an ecosystem, the last shortfall identified by Li Xiang will be transformed into a competitive advantage on the world stage.

SignUpSignUp form

LEAVE A REPLY

Please enter your comment!
Please enter your name here